D Standard guitar tuning: D G C F A D
Tune all six guitar strings down one whole step from E Standard to D2, G2, C3, F3, A3 and D4 while preserving the familiar chord and scale shapes.
A full guitar step lower than E Standard
D Standard moves every string down two semitones, so the intervals under your fingers stay identical to E Standard while the guitar sounds a whole tone lower. It is different from Drop D, which lowers only the sixth string and leaves the other five at Standard pitch.
The lower register reduces tension with the same strings, but it can become loose on a light-gauge set. Tune low to high, make small peg movements near center and perform a second pass after the neck has settled.
How to tune accurately
- 1Select D2 and lower the sixth string from E2 by one whole step.
- 2Continue through G2, C3 and F3 while muting the strings you are not tuning.
- 3Finish with A3 and D4, holding each target in the green zone for one second.
- 4Repeat the low-to-high pass once all six strings have settled under their new tension.
Notes and frequencies
| Physical string | Target | Frequency |
|---|---|---|
| String 6 | D2 | 73.42 Hz |
| String 5 | G2 | 98.00 Hz |
| String 4 | C3 | 130.81 Hz |
| String 3 | F3 | 174.61 Hz |
| String 2 | A3 | 220.00 Hz |
| String 1 | D4 | 293.66 Hz |
Changing the tuner calibration recalculates every target from A4 = 415–450 Hz. The values above use the common 440 Hz reference.
Frequently asked questions
What notes are D Standard tuning?
From the lowest to highest string, D Standard is D2, G2, C3, F3, A3 and D4.
Is D Standard the same as Drop D?
No. D Standard lowers all six strings by a whole step, while Drop D changes only the lowest E string to D.
Does tuner.love upload my microphone audio?
No. Pitch analysis runs locally in your browser. Microphone audio is not uploaded to a backend and is never replayed through your speakers.
Ready to tune?
Open the live tuner. Your browser handles the microphone signal locally.
Open d standard guitar tuning: d g c f a d